Developed jointly with a Japanese needle manufacturer, one of the world's three major needle brands.

Pursuing a shape that sticks well and is difficult to fall off.
Made of special alloy that is resistant to rust and boasts high durability.
The cut is a ring cut with a firm edge.

I tried it in increments of 0.01mm and set the line diameter φ2.34mm to fit most of the various barrels.
Achieved a tolerance of ±0.01mm using Japanese technology.
A guide line with a 1mm pitch is provided to make it easier to align the length when press-fitting the barrel.

■Specifications
Type: Cut / Uncut
Length: 32mm / 38mm / 42mm
Wire diameter: φ2.34mm Tolerance ±0.01mm
Material: Special alloy

■Country of manufacture
MADE IN JAPAN

■Notes Regardless
of barrel manufacturer or barrel type, There may be some barrels that cannot be installed due to the diameter setting of the hole on the barrel side or variations in tolerance.
Please note that this is not a defective point or barrel.

In addition, if the item is bent or bent during repointing, we cannot accept returns or exchanges. Thank you for your understanding.